Unit 3 Sections 17-18

• Do Now!!!
  • 3.17: Algorithm Efficiency
    • What is Algorithmic Efficiency?
  • Traveling Merchant Problem Hacks:
  • 3.18: Undecidable Problems
    • Decision Problem
  • Decidable Problems
    • Example of a Decidable Problem
  • Undecidable Problems
    • An Example of a Forever Running Code
    • The Halting Problem
    • Halting Problem Example:
      • This Diagram Sums up the Entire Process in the Bulleted List:
    • FAQ
    • Extra Things to Notice
  • Hacks
  • 3.17 Homework
  • 3.18 Homework:
    • Homeworks, hacks, and classwork(filled in blanks) for both 3.17 and 3.18 are due on Thursday at 9:00 pm. -0.1 points for each day late.

Do Now!!!

• Set up your notebook by either wgetting the lesson or tracking it by your own (We would recommend wgetting since there are some fill in the blanks!)
• wget here: https://raw.githubusercontent.com/mmaxwu/Tri2-GroupFastpages/master/_notebooks/2022-12-dd-lesson.ipynb

3.17: Algorithm Efficiency

Purpose:

The purpose of this lesson is to help students understand how to make an efficient program and optimize it and understand its importance to the CSP curriculum.

What is Algorithmic Efficiency?

• The ability of an algorithm to solve a problem in an efficient way
  • An efficient algorithm solves a problem quickly and with a minimum amount of rescources, such as time and memory.
• How do we determine if an algorithm is efficient or not?
  • One way we can do this is by determining the time complexity of the algorithm.
  • Another way is through space complexity.

Traveling Merchant Problem Hacks:

What did you and your team discuss? (record below)

• An heuristic solution is an approach to a problem that produces a solution that isn't necessarily efficient but can be used when normal methods take forever

Describe the method used to solve the traveling merchant problem. (record below)

3.18: Undecidable Problems

Purpose:

The purpose of this lesson is to introduce students to the concept of undecidable problems in computer science and to explain why these problems are important.

Key vocabulary:

• Decision problem
• Decidable problem
• Undecidable problem

Decision Problem

A decision problem is a problem in computer science and mathematics that can be solved by a yes-no answer, also known as a binary answer. In other words, a decision problem is a problem for which there are only two possible outputs:"yes" or "no". There are two types of decision problems that Collegeboard goes over:

• Decidable Problems
• Undecidable Problems

A dedicable is a problem in computer science and mathematics for which an algorithm can be created that can always produce a correct answer or solution. In other words, a decidable problem is a problem for which there exists an algorithm that can be used to determine whether a given input is a valid solution or not.

An undecidable problem is a problem in computer science and mathematics for which it is impossible to create an algorithm that can always provide a correct answer or solution. This means that it is not possible for an algorithm to always determine whether a given input is a valid solution to an undecidable problem.

Decidable Problems

A decidable problem is an algorithm that can always have an output of yes or no given any input. It is always correct.

Example of a Decidable Problem

The procedure below tests to see if a number is divisible by 13. If it is, it returns true. If it isn't, it returns false.

def divideThirteen(number):
    if number % 13 == 0:
        return True
    else:
        return False

print(divideThirteen(26))
print(divideThirteen(30))

True
False

Undecidable Problems

An Example of a Forever Running Code

The code keeps adding 1 to the variable number until number is no longer an integer(This is not the python data type "integer", it's the integer in number theory). However, there is no end to this code, making the computer run forever. There is no halt to the code.

i = 0
number = 1
def integerTest(n):
    # Testing if the number is an integer
    if n%1 ==0:
        return True
    else:
        return False
# Using while loop to keep searching an a non-integer above 1. Note that the computer runs forever.
while i == 0:
    number += 1
    if integerTest(number) == False:
        i +=1
        print("Done")

---------------------------------------------------------------------------
KeyboardInterrupt                         Traceback (most recent call last)
Cell In [3], line 12
     10 while i == 0:
     11     number += 1
---> 12     if integerTest(number) == False:
     13         i +=1
     14         print("Done")

Cell In [3], line 5, in integerTest(n)
      3 def integerTest(n):
      4     # Testing if the number is an integer
----> 5     if n%1 ==0:
      6         return True
      7     else:

KeyboardInterrupt: 

The Halting Problem

The halting problem is an example of an undecidable problem. It states that it is not always possible to correctly determine whether a code halts or runs forever.

There is no way to write an algorithm to analyze and determine whether a body of code can run forever or not.

Halting Problem Example:

• In order to understand this, suppose that an algorithm was able to analyze whether a code halts or not. Let's call this algorithm HaltChecker.
• HaltChecker analyzes the program,program P, and its input,input I. If program P halts with input I, HaltChecker returns an output of "halts". If program P doesn't halt(runs forever) with input I, HaltChecker returns an output of "never". For example, in the code where it tests if variable number, the code runs forever, so HaltChecker returns an output of never.
• Then, we add another algorithm called Reverser which reverses HaltChecker's output. So, if "never" is the output of HaltChecker, then the output of Reverser is halts. It's also the same the other way around: if HaltChecker has an output of "halts", then Reverser has an output of never.
• We combine these algorithms into one entire body of code.
• Since Reverser is the algorithm at the end, hence giving the ultimate output, notice how it prints "never" when in fact there is an end(As proved by HaltChecker), and how it also prints "halts" when there is in fact is no end to the code(Also proved by HaltChecker). As a result, HaltChecker is inaccurate and this is an undecidable problem.

This Diagram Sums up the Entire Process in the Bulleted List:

Credits of diagram and example to Khan Academy

FAQ

• Q: If Reverser is causing the problem, why not remove it?
• A: Removing Reverser will remove the problems, however, we are looking for ways which create the problem of not outputting a correct result. One example is enough to prove that it is an undecidable problem since it proves that the code is not completely accurate.

Extra Things to Notice

• Note that while a computer may take a long time to run a section of code, it does not mean that the computer is going to run forever.
• Humans are able to solve some undecidable problems. The entire Halting Problem example was to prove that computers cannot solve undecidable problems.

Hacks

Come up with one situation in which a computer runs into an undecidable problem. Explain why it is considered an undecidable problem.

3.17 Homework

Your homework for Algorithmic Efficiency is pretty simple.

1. Use the 1st code below and graph it (Desmos, TI Inpire Cas, e.t.c), change the x value only!
2. Label the number of loops done as x and the time (microseconds) to find the index as y
3. Connect the points
4. Do the same thing with the 2nd code
5. Compare the two graphs and explain which one of the two is more efficient and why (min. 2 sentences)
6. Insert images of the graph either in your blog or on review ticket

import time

def linear_search(lst, x):
    start_time = time.perf_counter_ns() 
    for i in range(len(lst)): 

        if lst[i] == x: 
            end_time = time.perf_counter_ns() 
            total_time = (end_time - start_time) // 1000 
            print("Found element after {} loops in {} microseconds".format(i+1, total_time)) 
            return print("Your number was found at", i)
            
    end_time = time.perf_counter_ns() 
    total_time = (end_time - start_time) // 1000 
    print("Element not found after {} loops in {} microseconds".format(len(lst), total_time)) 
    return "Your number wasn't found :("


lst = list(range(1, 10001)) 

x = 9000

linear_search(lst, x) 

Found element after 9000 loops in 1271 microseconds
Your number was found at 8999

import time 

def binary_search(lt, x):
    start_time = time.perf_counter_ns() # starts timer
    low = 0 # sets the lower side 
    mid = 0 # sets mid value
    high = len(lt) -1 # sets the higher side
    num_loops = 0 # number of loops the search undergoes to find the x value

    while low<=high: # Loop ran until mid is reached
        num_loops += 1 # adds one loop each time process is repeated
        mid = (low + high) // 2 # takes the lowest and highest possible numbers and divides by 2 and rounds to closest whole #

        if lt[mid] == x:
            end_time = time.perf_counter_ns() # records time
            total_time = (end_time - start_time) // 1000 # time in microseconds
            print("Element found after {} loops in {} microseconds".format(num_loops, total_time)) # prints the results
            return mid # returns the index value

        elif lt[mid] > x: # if mid was higher than x value, then sets new highest value as mid -1 
            high = mid -1 

        elif lt[mid] < x:
            low = mid + 1 # if mid was lower than x, sets the new low as mid + 1
            
    end_time = time.perf_counter_ns()
    total_time = (end_time - start_time) // 1000 
    print("Element not found after {} loops in {} microseconds".format(num_loops, total_time)) # prints the results
    return "Your number wasn't found :("


lt = list(range(1, 10001)) # list with numbers 1-10000

x = 149 # replace with an integer between 1 and 10000 (I suggest big numbers like 500, 2000, so on)

binary_search(lt, x) # runs procedure

Element found after 13 loops in 16 microseconds

148

3.18 Homework:

1. Use the Jupyter notebook to write an algorithm that solves a decidable problem. You can use math or whatever else you would like to do.
2. Write code to get the computer to run forever. Check this example if you need help, but please come up with your own idea.

Homeworks, hacks, and classwork(filled in blanks) for both 3.17 and 3.18 are due on Thursday at 9:00 pm. -0.1 points for each day late.

def find_largest_number(numbers):
  # Set the initial largest number to be the first number in the list
  largest_number = numbers[0]
  
  # Loop through the remaining numbers in the list
  for number in numbers[1:]:
    # If the current number is larger than the largest number, update the largest number
    if number > largest_number:
      largest_number = number
  
  # Return the largest number
  return largest_number

# Call the find_largest_number function and pass it a list of numbers
result = find_largest_number([1, 2, 3, 4, 5])

# Print the result
print(result)

5

This algorithm takes in a list of numbers and iterates through the list to find the largest number. It does this by setting the initial largest number to be the first number in the list, and then iterating through the remaining numbers in the list to see if any are larger. If a larger number is found, the algorithm updates the largest number and continues iterating until all numbers have been checked. Finally, the algorithm returns the largest number.